Email format error
Email cannot be empty
Email already exists
6-20 characters(letters plus numbers only)
The password is inconsistent
Email format error
Email cannot be empty
Email does not exist
6-20 characters(letters plus numbers only)
The password is inconsistent
The TSUENSAINT nylon strap cable tie injection molding machine (HJ/360-580T) boasts efficiency with a single-cylinder injection system and precision pneumatic self-locking nozzle. Specially designed for PA material, it ensures fast feeding, excellent plasticizing, and accurate temperature control. The increased oil circuit design meets fast molding requirements, while the Nano far-infrared heating device ensures rapid and energy-efficient plasticizing.
Nylon Injection Molding Machine
Product Description
The TSUENSAINT HJ/360-580T nylon strap cable tie injection molding machine excels in precision molding. Its efficient single-cylinder injection system, precise pneumatic self-locking nozzle, and tailored screw and barrel assembly for PA material ensure swift and accurate production. With an advanced oil circuit design, it meets fast molding demands, and the Nano far-infrared heating device ensures quick heating, energy conservation, and superior plasticizing quality. This machine is a high-performance solution for Nylon strap cable tie production.
Product Features
Product Advantages
Product Application
HJ360ZD |
450/828 HJ450ZD |
||||||||
Screw type | A | B | A | B | |||||
Injection Unit | |||||||||
Screw diameter | mm | 50 | 55 | 55 | 60 | ||||
Screw L/D ratio | L/D | 26.4 | 24 | 27 | 24.8 | ||||
Shot volume (theoretical) | CM3 | 441 | 534 | 593 | 706 | ||||
Injection weight | g | 401 | 486 | 540 | 642 | ||||
Injection rate | g/s | 320 | 400 | ||||||
Injection pressure | Mpa | 574 | 695 | 865 | 1029 | ||||
Injection speed | mm/s | 147 | 121 | 148 | 124 | ||||
Screw speed | rpm | 350 | 350 | ||||||
Clamping Unit | |||||||||
Clamping force | KN | 3500 | 4200 | ||||||
Open stroke | mm | 570 | 650 | ||||||
Space between tie‑bars(W*H) | mm | 620×570 | 655×605 | ||||||
Max. mould height | mm | 600 | 670 | ||||||
Min. mould height | mm | 220 | 250 | ||||||
Ejector stroke | mm | 100 | 100 | ||||||
Ejector force | KN | 70 | 70 | ||||||
Others | |||||||||
Pump max. pressure | Mpa | 17.5 | 17.5 | ||||||
Pump motor power (servo) | KW | 51 | 40+40 | ||||||
Heating power | KW | 20 | 23 | ||||||
Numbers of heating area | Segment | 3+1 | 3+1 | ||||||
Machine dimension (L*W*H) | M | 6.54× 1.72×2.35 | 7.6 × 1.79×2.36 | ||||||
Oiltank cubage | L | 600 | 800 | ||||||
Machine weight | TON | 12 | 14.2 |
HJ520ZD |
580/828 HJ580ZD |
||||||||
Screw type | A | B | A | B | |||||
Injection Unit | |||||||||
Screw diameter | mm | 55 | 60 | 60 | 65 | ||||
Screw L/D ratio | L/D | 27 | 24.8 | 27 | 24.9 | ||||
Shot volume (theoretical) | CM3 | 593 | 706 | 700 | 822 | ||||
Injection weight | g | 540 | 642 | 637 | 748 | ||||
Injection rate | g/s | 400 | 440 | ||||||
Injection pressure | Mpa | 865 | 1029 | 1132 | 1329 | ||||
Injection speed | mm/s | 148 | 124 | 135 | 115 | ||||
Screw speed | rpm | 350 | 350 | ||||||
Clamping Unit | |||||||||
Clamping force | KN | 4700 | 5400 | ||||||
Open stroke | mm | 705 | 730 | ||||||
Space between tie‑bars(W*H) | mm | 685×660 | 730×675 | ||||||
Max. mould height | mm | 670 | 750 | ||||||
Min. mould height | mm | 250 | 300 | ||||||
Ejector stroke | mm | 100 | 100 | ||||||
Ejector force | KN | 70 | 70 | ||||||
Others | |||||||||
Pump max. pressure | Mpa | 17.5 | 17.5 | ||||||
Pump motor power (servo) | KW | 40+40 | 51+40 | ||||||
Heating power | KW | 23 | 27 | ||||||
Numbers of heating area | Segment | 3+1 | 3+1 | ||||||
Machine dimension (L*W*H) | M | 7.8 × 1.95×2.45 | 8.2 × 1.95×2.45 | ||||||
Oiltank cubage | L | 850 | 1100 | ||||||
Machine weight | TON | 16.8 | 22.5 |